How to use DMZ (transparent NAT)

As close to bridge mode as you’re going to get!

Browse to NETWORK - Local LAN
the default IP Address is
(feel free to change to what you prefer)
NOTE: DHCP range starts at .100 through .200
so we know we can use any address for the DMZ settings between and

Next browse to SECURITY - Firewall
enable DMZ and enter an address range between .2 and .99 
For the purposes of this write up use
Now go to your mesh wifi router and setup a static address, for the purposes of this write up here’s what my setup looks like 
Back to blog